Overview The PTFE tube connector is a component used to connect PTFE tubes and is installed above the effector module so that consumables can enter the throat correctly. Product Specification Quantity 3 pcs Materials Plasti...

Overview The power supply provides power to the various components of the printer, ensuring that they operate properly. It is placed in the lower case of the printer. Product Specification Input Voltage 110V-240V Output Pow...

Overview The drying chamber cable is an 11pin cable used to connect the effector and the motherboard. Product Specification Plug Double-ended 11pin Length 400mm    

Overview The drying box fan is located inside the drying box and is mainly used to circulate the air in the box to ensure uniform distribution of temperature and humidity; increase the flow speed of the air to accelerate the dr...

Overview The drying box will absorb the humidity in the air to keep the consumables dry, ensuring that the printing effect will not be affected by the status of the consumables.   Product Specification Color Black Package...

Overview The control board fan (4010) is located inside the upper case and is used to cool the motherboard and driver board to prevent the board from shutting down due to overheating. Product Specification Voltage / Operati...

Overview The camera is used to determine whether any abnormal problems occur during the printing process and alarm in time. It is installed below the X-axis. The camera has remote monitoring and time-lapse photography functions...

Overview The air filter fan (9025 fan) is located on the upper right side of the cavity and is used to filter harmful gases in the cavity. Product Specification Voltage / Operation Voltage 36 V Operation Current 0.2 A Mat...

Overview Melt extrusion printers will generate VOCs while printing because the heating temperature of ABS, PC, PA and other materials is relatively high, resulting in more VOCs. Materials such as PLA with lower melting points p...

Overview Flsun glue stick provides suitable adhesion between the build plate and the model, and also it's formaldehyde-free. User Guide Apply evenly to the cleaned build plate before printing and cover all print areas. Please ...