Sort by
Рекомендуется
Наиболее актуальные
Лидер продаж
От А до Я
От Я до А
По возрастанию цены
По убыванию цены
Сначала старые
Сначала новые
$14.99
In stock
Overview
The Silicone Sock for Hotend is made from high-quality silicone for higher temperature resistance (rated to 300°C printing temperatures).Ensuring optimal thermal insulation and tear resistance, the silicone sock also p...
$31.89
In stock
Overview
The motors are three identical stepper motors installed on the top above the three axes of the printer, used to drive the tool head to move in the XYZ direction. Includes motor , motor cable and synchronized wheel.
Pr...
$19.49
In stock
Overview
The drying chamber cable is an 11pin cable used to connect the effector and the motherboard.
Product Specification
Plug
Double-ended 11pin
Length
400mm
$10.48
Sold out
Overview
Flsun glue stick provides suitable adhesion between the build plate and the model, and also it's formaldehyde-free.
User Guide
Apply evenly to the cleaned build plate before printing and cover all print areas. Please ...
$7.49
In stock
Overview
The PTFE tube connector is a component used to connect PTFE tubes and is installed above the effector module so that consumables can enter the throat correctly.
Product Specification
Quantity
3 pcs
Materials
Plasti...
$10.48
In stock
Overview
The function of PTFE Tube is to reduce resistance and guide filament. The tube’s inner diameter is 2.7mm, and its outer diameter is 4mm.
Please note that the PTFE tubes are consumables and are at risk of wear, as they ...
Quick add
$42.99
$69.99
In stock
Overview
The driver board of the Flsun S1 motor is located on the side of the motor and is responsible for the operation and micro-step control of the motor.
Product Specification
Materials
PCBA
Color
Green
$39.99
$59.99
In stock
Overview
The extruder motor is installed on the effector and used to drive the movement of the extruder. It is a 36-series circular stepping motor.
Product Specification
Materials
Metal
Color
Black, Silver
$5.99
In stock
Overview
Melt extrusion printers will generate VOCs while printing because the heating temperature of ABS, PC, PA and other materials is relatively high, resulting in more VOCs. Materials such as PLA with lower melting points p...
$18.19
In stock
Overview
The belt adjustment kit is used to maintain belt tension, adjust belt position, reduce belt vibration and noise, while reducing manual intervention and improving accuracy.
Product Specification
Materials
Metal,...
$7.49
Sold out
Overview
The T1 nozzle uses a 0.4mm brass nozzle. Brass has good thermal conductivity, wear resistance and compatibility. And the nozzle is easy to replace.
Installation
Learn more about the replacement of the T1 Nozzle on Fls...
Showing 12 of 107 products
Load more items
Tags
RECENTLY VIEWED PRODUCTS