$11.98
In stock
Overview
The air duct is used to connect the turbine fan outlet to send air to the effector, dissipate heat to the nozzle and cool filaments. By guiding the cooling air flow and dissipating heat to ensure the colling speed of t...
Quick add
$10.48
In stock
Overview
Flsun glue stick provides suitable adhesion between the build plate and the model, and also it's formaldehyde-free.
User Guide
Apply evenly to the cleaned build plate before printing and cover all print areas. Please ...
$8.98
In stock
Overview
Melt extrusion printers will generate VOCs while printing because the heating temperature of ABS, PC, PA and other materials is relatively high, resulting in more VOCs. Materials such as PLA with lower melting points p...
$13.48
In stock
Overview
The air filter fan (9025 fan) is located on the upper right side of the cavity and is used to filter harmful gases in the cavity.
Product Specification
Voltage / Operation Voltage
36 V
Operation Current
0.2 A
Mat...
$35.19
In stock
Overview
The camera is used to determine whether any abnormal problems occur during the printing process and alarm in time. It is installed below the X-axis. The camera has remote monitoring and time-lapse photography functions...
$16.49
In stock
Overview
The control board fan (4010) is located inside the upper case and is used to cool the motherboard and driver board to prevent the board from shutting down due to overheating.
Product Specification
Voltage / Operati...
$8.98
In stock
Overview
The drying box will absorb the humidity in the air to keep the consumables dry, ensuring that the printing effect will not be affected by the status of the consumables.
Product Specification
Color
Black
Package...
$16.48
In stock
Overview
The drying box fan is located inside the drying box and is mainly used to circulate the air in the box to ensure uniform distribution of temperature and humidity; increase the flow speed of the air to accelerate the dr...
$19.49
In stock
Overview
The drying chamber cable is an 11pin cable used to connect the effector and the motherboard.
Product Specification
Plug
Double-ended 11pin
Length
400mm
$10.48
In stock
Overview
The effector fan（2515） is located inside the effector and is used to cool and reduce the temperature of the throat to prevent the consumables from softening or clogging during the melting process of the throat. The fan...
Showing 12 of 18 products
Load more items
Tags