Filter
Características
Más vendidos
Alfabéticamente, A-Z
Alfabéticamente, Z-A
Precio, menor a mayor
Precio, mayor a menor
Fecha: antiguo(a) a reciente
Fecha: reciente a antiguo(a)
$29.99
En stock
Quick add
Select 样式
$4.99
Agotado
Overview The heatbead sensor unit is a piezoelectric ceramic with a bracket installed, and is used to detect the condition of the surface pressure on the heatbed. There are 3 sensors installed on the bottom of the heatbed. Com...
$6.99
Agotado
Overview The function of PTFE Tube is to reduce resistance and guide filament. The tube’s inner diameter is 2.7mm, and its outer diameter is 4mm. Please note that the PTFE tubes are consumables and are at risk of wear, as they ...
$14.99
En stock
Overview The belt is a close drive belt, it is installed at the X/Y/Z axies of the FLSUN S1/T1 printer. Its main function is to transmit the motion of the motor to the three axis. Compatibility FLSUN S1 and T1 Printers Insta...
Quick add
Select Compatibility
$3.99
En stock
Overview The screen adapter cable is the cable responsible for transmitting signals to the display device. Product Specification Materials FPC Length 150 mm  
$4.99
En stock
Overview Both ends of the camera cable are connected to the camera and the USB adapter board respectively for data transmission. Product Specification Materials Plastic, metal Color Black  
$10.99
En stock
Overview Both ends of the effector line are connected to the mainboard and the effector respectively, and are used to provide communication and power supply to the effector. Product Specification Plug Double-ended 9pin Leng...
$36.99
En stock
Overview The power supply provides power to the various components of the printer, ensuring that they operate properly. It is placed in the lower case of the printer. Product Specification Input Voltage 110V-240V Output Pow...
$6.99
En stock
Overview The air filter fan (4010 fan) is located in the upper housing and is used to filter harmful gases generated in the cavity. Product Specification Voltage / Operation Voltage 24 V Operation Current 0.1 A Materials...
$3.99
En stock
Overview Melt extrusion printers will generate VOCs while printing because the heating temperature of ABS, PC, PA and other materials is relatively high, resulting in more VOCs. Materials such as PLA with lower melting points p...
$13.99
En stock
Overview The belt adjustment kit is used to maintain belt tension, adjust belt position, reduce belt vibration and noise, while reducing manual intervention and improving accuracy.   Product Specification Materials Metal,...
$11.99
Agotado
Overview The LED light are installed on the Y axes of the printer. Provides illumination inside the printer cavity, and there is a cable interface on one side of the light strip for connection. Product Specification Materia...
Showing 12 of 27 products
Load more items
Etiquetas de filtro

RECENTLY VIEWED PRODUCTS