Sort by
Рекомендуется
Лидер продаж
От А до Я
От Я до А
По возрастанию цены
По убыванию цены
Сначала старые
Сначала новые
$14.99
In stock
Overview
The belt is a close drive belt, it is installed at the X/Y/Z axies of the FLSUN S1/T1 printer. Its main function is to transmit the motion of the motor to the three axis.
Compatibility
FLSUN S1 and T1 Printers
Insta...
Quick add
$7.99
In stock
Overview
The air duct is used to connect the turbine fan outlet to send air to the effector, dissipate heat to the nozzle and cool filaments. By guiding the cooling air flow and dissipating heat to ensure the colling speed of t...
Quick add
$79.99
In stock
Overview
High-pressure cooling fan: Compared to the S1, this high-performance cooling fan provides efficient heat dissipation with lower noise levels. Enjoy a quieter workspace with noise reduced to only 55 dB.
Large Diame...
Quick add
$6.99
In stock
Overview
Flsun glue stick provides suitable adhesion between the build plate and the model, and also it's formaldehyde-free.
User Guide
Apply evenly to the cleaned build plate before printing and cover all print areas. Please ...
$6.99
Sold out
Overview
The function of PTFE Tube is to reduce resistance and guide filament. The tube’s inner diameter is 2.7mm, and its outer diameter is 4mm.
Please note that the PTFE tubes are consumables and are at risk of wear, as they ...
$5.99
In stock
Overview
Melt extrusion printers will generate VOCs while printing because the heating temperature of ABS, PC, PA and other materials is relatively high, resulting in more VOCs. Materials such as PLA with lower melting points p...
$8.99
In stock
Overview
The air filter fan (9025 fan) is located on the upper right side of the cavity and is used to filter harmful gases in the cavity.
Product Specification
Voltage / Operation Voltage
36 V
Operation Current
0.2 A
Mat...
$31.99
In stock
Overview
The camera is used to determine whether any abnormal problems occur during the printing process and alarm in time. It is installed below the X-axis. The camera has remote monitoring and time-lapse photography functions...
$10.99
In stock
Overview
The control board fan (4010) is located inside the upper case and is used to cool the motherboard and driver board to prevent the board from shutting down due to overheating.
Product Specification
Voltage / Operati...
$5.99
In stock
Overview
The drying box will absorb the humidity in the air to keep the consumables dry, ensuring that the printing effect will not be affected by the status of the consumables.
Product Specification
Color
Black
Package...
$24.99
Sold out
Overview
The drying box board is the main board of the drying box and is responsible for implementing functions related to the interior of the drying box, including weighing consumables, drying consumables, etc., to ensure the ...
Showing 12 of 34 products
Load more items
Tags
RECENTLY VIEWED PRODUCTS