Filter
Filter by
Sort by
Рекомендуется
Лидер продаж
От А до Я
От Я до А
По возрастанию цены
По убыванию цены
Сначала старые
Сначала новые
$4.99
Sold out
Overview
The heatbead sensor unit is a piezoelectric ceramic with a bracket installed, and is used to detect the condition of the surface pressure on the heatbed. There are 3 sensors installed on the bottom of the heatbed.
Com...
$6.99
Sold out
Overview
The function of PTFE Tube is to reduce resistance and guide filament. The tube’s inner diameter is 2.7mm, and its outer diameter is 4mm.
Please note that the PTFE tubes are consumables and are at risk of wear, as they ...
$14.99
In stock
Overview
The belt is a close drive belt, it is installed at the X/Y/Z axies of the FLSUN S1/T1 printer. Its main function is to transmit the motion of the motor to the three axis.
Compatibility
FLSUN S1 and T1 Printers
Insta...
Quick add
$3.99
In stock
Overview
The screen adapter cable is the cable responsible for transmitting signals to the display device.
Product Specification
Materials
FPC
Length
150 mm
$4.99
In stock
Overview
Both ends of the camera cable are connected to the camera and the USB adapter board respectively for data transmission.
Product Specification
Materials
Plastic, metal
Color
Black
$10.99
In stock
Overview
Both ends of the effector line are connected to the mainboard and the effector respectively, and are used to provide communication and power supply to the effector.
Product Specification
Plug
Double-ended 9pin
Leng...
$36.99
In stock
Overview
The power supply provides power to the various components of the printer, ensuring that they operate properly. It is placed in the lower case of the printer.
Product Specification
Input Voltage
110V-240V
Output Pow...
$6.99
In stock
Overview
The air filter fan (4010 fan) is located in the upper housing and is used to filter harmful gases generated in the cavity.
Product Specification
Voltage / Operation Voltage
24 V
Operation Current
0.1 A
Materials...
$3.99
In stock
Overview
Melt extrusion printers will generate VOCs while printing because the heating temperature of ABS, PC, PA and other materials is relatively high, resulting in more VOCs. Materials such as PLA with lower melting points p...
$13.99
In stock
Overview
The belt adjustment kit is used to maintain belt tension, adjust belt position, reduce belt vibration and noise, while reducing manual intervention and improving accuracy.
Product Specification
Materials
Metal,...
$11.99
Sold out
Overview
The LED light are installed on the Y axes of the printer. Provides illumination inside the printer cavity, and there is a cable interface on one side of the light strip for connection.
Product Specification
Materia...
Showing 12 of 27 products
Load more items
Tags
RECENTLY VIEWED PRODUCTS