Filter
Рекомендуется
Лидер продаж
От А до Я
От Я до А
По возрастанию цены
По убыванию цены
Сначала старые
Сначала новые
$14.99
In stock
Overview The belt is a close drive belt, it is installed at the X/Y/Z axies of the FLSUN S1/T1 printer. Its main function is to transmit the motion of the motor to the three axis. Compatibility FLSUN S1 and T1 Printers Insta...
Quick add
Select Compatibility
$7.99
In stock
Overview The air duct is used to connect the turbine fan outlet to send air to the effector, dissipate heat to the nozzle and cool filaments. By guiding the cooling air flow and dissipating heat to ensure the colling speed of t...
Quick add
Select Compatibility
$69.99
In stock
Overview Top-Tier Cooling Fan: In the case of applying at T1, it will lower the decibel level to 55dB while still meet the cooling need. You can focus on your creations without distraction. Large Diameter of Air Duct: ...
Quick add
Select SHIP FROM
$6.99
In stock
Overview Flsun glue stick provides suitable adhesion between the build plate and the model, and also it's formaldehyde-free. User Guide Apply evenly to the cleaned build plate before printing and cover all print areas. Please ...
$3.99
Sold out
Overview Melt extrusion printers will generate VOCs while printing because the heating temperature of ABS, PC, PA and other materials is relatively high, resulting in more VOCs. Materials such as PLA with lower melting points p...
$6.99
Sold out
Overview The air filter fan (4010 fan) is located in the upper housing and is used to filter harmful gases generated in the cavity. Product Specification Voltage / Operation Voltage 24 V Operation Current 0.1 A? Materials...
$13.99
Sold out
Overview The belt adjustment kit is used to maintain belt tension, adjust belt position, reduce belt vibration and noise, while reducing manual intervention and improving accuracy. ? Product Specification Materials Metal,...
$4.99
Sold out
Overview The T1 Pro nozzle uses a 0.4mm brass nozzle. Brass has good thermal conductivity, wear resistance and compatibility. And the nozzle is easy to replace. Installation Learn more about the replacement of the T1 Pro Nozzl...
$24.99
Sold out
Overview The camera monitors whether there are any abnormal problems during the printing process. It is installed below the X-axis. The camera has remote monitoring and time-lapse photography functions. Remote monitoring: chec...
$4.99
Sold out
Overview Both ends of the camera cable are connected to the camera and the USB adapter board respectively for data transmission. Product Specification Materials Plastic, metal Color Black ?
$11.99
Sold out
Overview The T1 Pro printer use 4 TMC2160 drivers, which is a silent driver. Product Specification Materials PCBA Color Green ?
$116.99
Sold out
Showing 12 of 26 products
Load more items
Tags

RECENTLY VIEWED PRODUCTS